generator controller
Showing 29–56 of 64 results
-
Sensors
Magnetic Pickup (MPU) MSP6729 for Generator
- MSP6729
- 3/8 – 24 UNF-2A Threaded
- 2.5″ Length with 6′ Shielded Cable
- All are designed and tested to operate within a temperature range of -65F to 225F (-55C to 105C) .
- Magnetic Speed Sensors are with Wire Leads
- Click Here To Download MSP6729 User Manual
- Click Here To Download MSP6729 Specifications
SKU: n/a -
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, Multimeters
MEA-11C Network Analyzer With RS485 Communication
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, MultimetersMEA-11C Network Analyzer With RS485 Communication
Key Features
- The measurement information of parameters can be read from the display
- 3 wire + neutral systems can be measured
- It supports the Modbus protocol on RS485 communication
- A Special PC software is available for download specified parameters
- The turn rate of the current transformer and the turn rate of the voltage transformer can be changed
- The specified parameters can be recorded in a static area with a timestamp
- The recorded parameters can be
- downloaded to PC using special software
- The electricity in wires can be seen from the symbols on the LCD instantly
- The device is protected with a password for authorized used
- Click Here To Download Connection Scheme
- Click Here To Download Technical Specifications
- Click Here To Download Technical Drawings
SKU: n/a -
Electronic Governors
S6700E Engine Speed Control Unit for Generators
Key Features:
- The S6700E Speed control Unit is an All-Electronic Device Designed to control engine speed with fast and precise response to transient load changes.
- The basic characteristics of this unit S6700E is to reach rated speed and power as well as reducing smoke exhaust through adjustment of firing fuel and speed-rate.
- The S6700E speed control Unit provides a series of protection once the power supply is reversely connected. Transient over voltage or actuator fault happens, or Speed input breaks.
- S6700E Speed Control Unit Engine Governor Controller for Diesel Generator Genset
- High reliability and can withstand all kinds of electromagnetic interference around the engine
- Easy to install, you can adjust the working speed in advance to meet your requirements
- Fast and precise response, able to recognize momentary symbol changes
- Fully electronic closed-loop design and control of a wide range of engines
SKU: n/a -
Electronic Governors
S6700H Engine Speed Control Unit for Generators
Key Features:
- Speed control Unit S6700H is an All-Electronic Device Designed to control engine speed with fast and precise response to transient load changes
- Actuator default protection
- Speed signal Lose protection
- Over-speed & External high Level input Alarm
- High reliability and can withstand all kinds of electromagnetic interference around the engine
- Easy to install, you can adjust the working speed in advance to meet your requirements
- Prevent reverse battery voltage, instantaneous pulse voltage. So as not to damage the machine
- Fast and precise response, able to recognize momentary symbol changes
- Fully electronic closed-loop design and control of a wide range of engines
SKU: n/a -
Generator Battery Chargers
SMPS1210 12V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS1210-D 12V/10A Genset Battery Charger With Display
Key Features
- Output voltage and current display
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210-D User Manual
SKU: n/a -
Generator Battery Chargers
SMPS1210-FlyBack 12V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210-FlyBack User Manual
SKU: n/a -
Generator Battery Chargers
SMPS125 12V/5A Battery Charger for Generators
Key Features
- 100 KHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Plug-in connection system
- Click Here To Download SMPS125 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS2410 24V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS2410 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS245 24V/5A Genset Battery Charger
Key Features
- 100 KHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Plug-in connection system
- Click Here To Download SMPS245 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG155 Manual Start Genset Controller With Key Switch
-35%Genset Products, Manual & Remote Start UnitsDKG155 Manual Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- Digital display of generator frequency
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Spare fault input
- Alarm output
- Two-part connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DKG155 User Manual
- Click Here To Download DKG155 Brochure
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
Key Features
- Back-lit icon LCD display
- Front panel editing
- LED and LCD alarm indication
- Power Save mode
- PC configurable
- 6 Digital inputs
- 4 Outputs (2 configurable)
- Configurable timers and alarms
- Remote Start input
- Generator voltage display
- Generator frequency display
- Battery voltage display
- Engine speed display
- Hours counter
- Engine pre-heat
- Click Here To Download DSE3110 User Manual
- Click Here To Download DSE3110 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE4510-MKII-CHN Manual & Auto Genset Controller
Key Features
- Alternator frequency & CAN speed sensing in one variant
- Largest back-lit icon display in its class
- Heated display option
- Real-time clock provides accurate event logging
- Fully configurable via the fascia or PC using USB communication
- Extremely efficient power save mode
- 3 phase generator sensing
- Compatible with 600 V ph to ph nominal systems
- Generator/load power monitoring (kW, kV A, kV Ar, pf)
- Accumulated power monitoring (kW h, kVA h, kVAr h)
- Generator overload protection (kW)
- Generator/load current monitoring and protection
- Fuel and start outputs (configurable when using CAN)
- 2 configurable DC outputs
- 3 configurable analog/digital inputs
- 4 configurable digital inputs
- Configurable staged loading outputs
- 3 engine maintenance alarms
- Engine speed protection
- Engine hours counter
- Engine pre-heat
- Engine run-time scheduler
- Engine idle control for starting & stopping
- Battery voltage monitoring
- Start on low battery voltage
- Configurable remote start input
- 1 alternative configuration
- Comprehensive warning, electrical trip or shutdown protection upon a fault condition
- LCD alarm indication
- Event log (50)
- Click Here To Download DSE4510 User Manual
- Click Here To Download DSE4510 Data Sheet
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
-16%Automatic Mains Failure Units (AMF), Genset ProductsDSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features
- Alternator frequency & CAN speed sensing in one variant
- Largest back-lit icon display in its class
- Heated display option
- Real-time clock provides accurate event logging
- Fully configurable via the fascia or PC using USB communication
- Extremely efficient power save mode
- 3 phase generator sensing
- Compatible with 600 V ph to ph nominal systems
- Generator/load power monitoring (kW, kV A, kV Ar, pf)
- Accumulated power monitoring (kW h, kVA h, kVAr h)
- Generator overload protection (kW)
- Generator/load current monitoring and protection
- Fuel and start outputs (configurable when using CAN)
- 4 configurable DC outputs
- 3 configurable analog/digital inputs
- 4 configurable digital inputs
- Configurable staged loading outputs
- 3 engine maintenance alarms
- Engine speed protection
- Engine hours counter
- Engine pre-heat
- Engine run-time scheduler
- Engine idle control for starting & stopping
- Battery voltage monitoring
- Start on low battery voltage
- Configurable remote start input
- 1 alternative configuration
- Comprehensive warning, electrical trip or shutdown protection upon a fault condition
- LCD alarm indication
- Event log (50)
- Click Here To Download DSE4520 User Manual
- Click Here To Download DSE4520 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE501K Manual Start Genset Controller With Key Switch
-24%Genset Products, Manual & Remote Start UnitsDSE501K Manual Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Alarm output
- Plug-in connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DSE501K Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE5110 Manual & Auto Genset Controller
Key Features
- Automatic start
- Configurable inputs
- Configurable outputs
- Configurable alarms & timers
- Digital inputs
- Analogue inputs
- Back-lit character LCD display
- Engine protection
- Front panel mounting
- Icon based fault diagnostics
- PC configurable using P810 I/F
- Front panel programming
- Remote monitoring
- LCD alarm indication
- LED alarm indication
- Click Here To Download DSE5110 User Manual
- Click Here To Download DSE5110 Data Sheet
SKU: n/a -
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products
DSE5120 Auto Mains Failure Unit
-14%Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset ProductsDSE5120 Auto Mains Failure Unit
Key Features
- Automatic start
- Automatic mains (utility) failure detection
- Automatic load transfer
- Configurable inputs
- Configurable outputs
- Configurable alarms & timers
- Digital inputs
- Analog inputs
- Back-lit character LCD display
- Engine protection
- Front panel mounting
- Icon based fault diagnostics
- PC configurable using P810 I/F
- Front panel programming
- Remote monitoring
- LCD alarm indication
- LED alarm indication
- Click Here To Download DSE5120 User Manual
- Click Here To Download DSE5120 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE5210 AMF Controller
Key Features
- Automatic start
- Automatic mains (utility) failure
- detection (DSE5220 only)
- Automatic load transfer
- Configurable inputs
- Configurable outputs
- Configurable alarms & timers
- Digital inputs
- Analogue inputs
- Back-lit character LCD display
- Engine protection
- Front panel mounting
- PC configurable
- Front panel programming
- Remote monitoring
- Engine history event log
- LED alarm indication
- LCD alarm indication
- SMS messaging
- Hid till lit alarm icons
- Engine exercise mode
- Magnetic pick-up
- Click Here To Download DSE5210 Operators Manual
- Click Here To Download DSE5210 Data Sheet
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DSE5220 Auto Mains Failure Unit
Key Features
- Automatic start
- Automatic mains (utility) failure
- detection (DSE5220 only)
- Automatic load transfer
- Configurable inputs
- Configurable outputs
- Configurable alarms & timers
- Digital inputs
- Analogue inputs
- Back-lit character LCD display
- Engine protection
- Front panel mounting
- PC configurable
- Front panel programming
- Remote monitoring
- Engine history event log
- LED alarm indication
- LCD alarm indication
- SMS messaging
- Hid till lit alarm icons
- Engine exercise mode
- Magnetic pick-up
- Click Here To Download DSE5220 Operators Manual
- Click Here To Download DSE5220 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE6010-MKII Manual & Auto Genset Controller
Key Features
- Large back-lit icon display
- Heated display option available
- Fully configurable via the fascia or PC using USB comm.
- Efficient power save mode
- 3 phase generator sensing
- Generator/load power monitoring (kW, kV A, kV Ar, pf)
- Accumulated power monitoring (kW h, kVA h, kVAr h)
- Generator overload protection (kW)
- Generator/load current monitoring and protection
- Breaker control via fascia buttons
- Fuel and start outputs, configurable when using CAN
- 4 configurable DC outputs
- 4 configurable analog/digital inputs
- 6 configurable digital inputs
- Support for 0-10 V & 4-20 mA oil pressure sensors
- Configurable staged loading outputs
- CAN, MPU, and alternator speed sensing in one variant
- 3 engine maintenance alarms
- Engine speed protection
- Engine hours counter
- Engine pre-heat
- Engine run-time scheduler
- Engine idle control for starting & stopping
- Fuel pump control
- Real-time clock
- Battery voltage monitoring
- Start on low battery voltage
- Configurable remote start input
- 1 alternative configuration
- Comprehensive warning, electrical trip or shutdown protection upon a fault condition
- LCD and LED alarm indication
- Configurable event log (50)
- Click Here To Download DSE6010 User Manual
- Click Here To Download DSE6010 Data Sheet
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DSE6020-MKII Auto Mains Failure Unit
Key Features
- Large back-lit icon display
- Heated display option available
- Fully configurable via the fascia or PC using USB comm.
- Efficient power save mode
- 3 phase generator sensing
- 3 phase mains (utility) sensing
Generator/load power monitoring (kW, kV A, kV Ar, pf) - Accumulated power monitoring (kW h, kVA h, kVAr h)
- Generator overload protection (kW)
- Generator/load current monitoring and protection
- Breaker control via fascia buttons
- Fuel and start outputs, configurable when using CAN
- 4 configurable DC outputs
- 4 configurable analog/digital inputs
- 6 configurable digital inputs
- Support for 0-10 V & 4-20 mA oil pressure sensors
- Configurable staged loading outputs
- CAN, MPU, and alternator speed sensing in one variant
- 3 engine maintenance alarms
- Engine speed protection
- Engine hours counter
- Engine pre-heat
- Engine run-time scheduler
- Engine idle control for starting & stopping
- Fuel pump control
- Real-time clock
- Battery voltage monitoring
- Start on low battery voltage
- Configurable remote start input
- 1 alternative configuration
- Comprehensive warning, electrical trip or shutdown protection upon a fault condition
- LCD and LED alarm indication
- Configurable event log (50)
- Click Here To Download DSE6020 User Manual
- Click Here To Download DSE6020 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE701 Manual & Auto Start Genset Controller With Key Switch
-18%Genset Products, Manual & Remote Start UnitsDSE701 Manual & Auto Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Two-part connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DSE701 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE702 Manual & Auto Start Genset Controller With Key Switch
-11%Genset Products, Manual & Remote Start UnitsDSE702 Manual & Auto Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Hour run counter display
- Two-part connectors for easy replacement
- Standard panel dimensions (80mm x 68mm)
- Low cost
- Low failure rate
- Click Here To Download DSE702 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
DSE704 AMF (Auto Mains Failure Controller)
-12%Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsDSE704 AMF (Auto Mains Failure Controller)
Key Features
- Automatic mains (utility) supply monitoring
- Automatic shutdown when fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Single/three-phase mains sensing
- Dimensions: 165mm x 125mm x 29mm (6.5 x 4.9 x 1.2); Cut-out Size: 149mm X 109mm (5.9 x 4.3)
- Low cost
- Low failure rate
- Click Here To Download DSE704 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE710 Manual & Auto Genset Controller
Key Features
- PC configurable using P810 Interface
- Digital and analog inputs
- Digital outputs
- Automatic shutdown or warning
- When fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Configurable inputs
- Back-lit character/icon LCD display
- Click Here To Download DSE710 User Manual
- Click Here To Download DSE710 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE720 Manual & Auto Genset Controller
Key Features
- PC configurable using P810 Interface
- Digital and analog inputs
- Digital outputs
- Automatic mains (utility) supply monitoring
- Automatic shutdown or warning
- When fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Configurable inputs
- Back-lit character/icon LCD display
- Click Here To Download DSE720 User Manual
- Click Here To Download DSE720 Data Sheet
SKU: n/a -
Genset Products, Synchronization Units
DSE8610-MKII Synchronization Controller
Key Features
- Multi Genset synch & load share
- AMF unit (uninterrupted transfer)
- ATS unit (uninterrupted transfer)
- Remote start controller
- Manual start controller
- Engine controller
- Remote display panel
- Comprehensive synchronizing & load sharingcapabilities
- Built-in governor and AVR control
- Baseload (kW export) control
- Positive & negative kVAr export control
- Mains (Utility) decoupling protection
- 4-Line backlit LCD text display
- CAN AVR support
- Click Here To Download DSE8510-MKII User Manual
- Click Here To Download DSE8610-MKII Config. Suite PC Software Manual
SKU: DSE8610-MKII
