-10%
, ,

TTP223B Blue Touch Sensor 1-Ch-Capacitive Touch Sensor

Arduino

?Key Features :

  1. Low power consumption
  2. Power supply for 2 ~ 5.5V DC
  3. Can replace the traditional touch of a button
  4. Four M2 screws positioning holes for easy installation

 90.00  100.00

Compare

TTP223B Blue Touch Sensor 1-Ch-Capacitive Touch Sensor

Buy a complete range of Arduino boards and their component at a very cheap price from all over Pakistan. We are the one and only store in Pakistan providing our customers with a wide range of electronic products and components at a very reasonable price at their doorstep. You can buy Arduino? from all over Pakistan or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore.

Description:

The Digital Sensor TTP223B Module Capacitive Touch Switch is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
Jog type : the initial state is low , high touch , do not touch is low ( similar touch of a button feature )
Module can be installed in such as surface plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons.

Touch Sensor Interface :

  1. Control Interface: A total of three pins (GND, VCC, SIG), GND to ground, VCC is the power supply, SIG digital signal output pin
  2. Power Indicator: Green LED, power on the right that is shiny
  3. Touch area: Similar to a fingerprint icon inside the area, you can touch the trigger finger.
  4. Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination.

Features:

  1. Low power consumption
  2. Power supply for 2 ~ 5.5V DC
  3. Can replace the traditional touch of a button
  4. Four M2 screws positioning holes for easy installation

Specification:

  1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
  2. Output high VOH: 0.8VCC V
  3. Output low VOL: 0.3VCC V
  4. Response time (touch mode) : 60 mS
  5. Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
  6. Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
  7. Response time (low power mode) : 220 mS
  8. Size : 24 x 24 x 7.2 mm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “TTP223B Blue Touch Sensor 1-Ch-Capacitive Touch Sensor”

There are no reviews yet.

× How may I help you?