DKG317 Manual And Remote Start Unit
Key Features
- True RMS measurements
- Dual genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real-time clock
- Built in daily / weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- MODBUS communications
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG317 User Manual
₨ 27,000.00 ₨ 30,000.00
DKG317 Manual And Remote Start Unit
Buy all Datakom products like generator controllers, energy meters, panel meters, synchronization controllers, auto mains failures (AMF), auto transfer switches (ATS), generator battery chargers, online in Pakistan. You can buy DKG317, manual and remote start unit online, or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore who are the authorized distributor of Datakom in Pakistan. All original Datakom products are available at very reasonable and best prices in Pakistan.
Functionalities
- True RMS measurements
- Dual Genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real-time clock
- Built-in daily / weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- MODBUS communications
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
Description of DKG317
The DKG317 is a comprehensive generator control unit designed to start and stop the generating set both manually and remotely. The manual control is made using the pushbuttons on the front panel. The remote control is made via the REMOTE START input signal.
The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection, and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems.
The unit provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations, operating sequences and engine types. All programs may be modified via front panel pushbuttons, and do not require an external unit.
The last 100 faults are stored in the event log file. The event log includes not only the date-time information but also a comprehensive list of measured genset parameters at the time that the fault has occurred.
The WINDOWS based RAINBOW program allows remote monitoring and control.
Click Here To Download DKG317 User Manual
| brands | DATAKOM |
|---|---|
| color | Black |
Technical Specifications
Alternator voltage: 0 to 300 V-AC Phase to Neutral (0 to 520 V-AC Phase to Phase)
Alternator frequency: 0-100 Hz.
DC Supply range: 9.0 VDC to 33.0 VDC
Cranking dropouts: survives 0 V for 100ms
Typical stand-by current consumption: 100 mADC.
Maximum current consumption: 250 mADC.
Generator/mains contactor outputs: 16 A @ 250 VAC.
DC outputs: 10A @ 28 VDC. relay outputs.
Charge alternator excitation: min 2W.
Magnetic pickup input:: 0.5 30 V-AC.
Magnetic pickup frequency: 10 KHz max.
Current inputs: from current transformers, …/5A. Max load 0.7VA per phase.
Digital inputs: input voltage 0 – 30 VDC. Internally connected to battery positive via 47000 ohm resistor.
Analog inputs: Resistor input 0 to 5000 ohms connected to the battery negative. Sources 5 mA when
closed to battery negative.
Measurement category: CAT II
Air category: Pollution degree II
Communication port: RS-232. 9600 bauds, no parity, 1 stop bit.
Operating temperature range: -40C to +70C (-40F to +158F)
Storage temperature range: -55C to +80C (-67F to +176F)
Maximum humidity: 95%, non-condensing
Dimensions: 172x134x46mm (WxHxD)
Panel Cut-out dimensions: 151 x 111mm minimum.
Weight: 340 g (approx.)
Case material: High temperature, self extinguishing ABS/PC (UL94-V0)
IP protection: IP65 from front panel, IP30 from the rear
Based on 0 reviews
Be the first to review “DKG317 Manual And Remote Start Unit”
Related products
-
Genset Products, Synchronization Units
D700-TFT Advanced Auto-Learning Genset Synchronization Controller
-12%
Genset Products, Synchronization UnitsD700-TFT Advanced Auto-Learning Genset Synchronization Controller
D700 synchronization controller is tailored for the most demanding applications, and it can be used for
- Multi Genset synch & load share
- Mains synchronization
- Single Genset parallel with mains
- AMF unit (uninterrupted transfer)
- ATS unit (uninterrupted transfer)
- Remote start controller
- Manual start controller
- Engine controller
- Remote display panel
- Long term data record on a flash drive
- On-board Input&output extension
- Comprehensive synchronizing & load sharing capabilities
- Built-in governor and AVR control
- Baseload (kW export) control
- Positive & negative kVAr export control
- Mains (Utility) decoupling protection
- 4-Line backlit LCD text display
- CAN AVR support
- Click Here To Download D700-TFT User Manual
SKU: D700-Synch-TFT-Version -
Genset Products, Manual & Remote Start Units
DKG215 Manual And Remote Start Unit
Key Features
- Manual and remote starting and stopping
- Zero power consumption at rest
- Engine control mode available
- Generator protection
- Built-in alarms and warnings
- 1 phase Genset voltage input
- 1 phase Genset CT input
- Engine oil pressure measurement
- Engine coolant temperature measurement
- Engine fuel level measurement
- Genset active power measurement (single phase)
- Genset power factor measurement (single phase)
- Periodic maintenance request indicator
- Engine hours run counter
- Plug-in connection system for easy replacement
- Small dimensions (96x96x53mm)
- Low cost
- Click Here To Download DKG215 User Manual
SKU: n/a -
Auto Transfer Switches (ATS), Genset Products
DKG171 Auto Transfer Switch
Key Features
- The DKG-171 is a microprocessor-controlled unit
- Designed to monitor the 3-phase mains voltages
- Makes changeover of both generator and mains contactors
- Genset& Mains low voltages can be manually adjusted
- Small dimensions (72x72x52mm)
- Low cost
- Click Here To Download DKG171 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE501K Manual Start Genset Controller With Key Switch
-24%Genset Products, Manual & Remote Start UnitsDSE501K Manual Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Alarm output
- Plug-in connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DSE501K Manual
SKU: n/a
There are no reviews yet.