-13%
,

DKG325 Genset Control & ATS Panel


Key Features

  • Automatic load transfer
  • Automatic starting and stopping
  • Automatic stopping in a fault condition
  • Test mode available
  • Emergency backup mode
  • Internal current transformers
  • Detailed load measurements and protections
  • Internal battery charging rectifier
  • 40 Amp rated Fuel and Crank outputs
  • Front panel adjustable parameters
  • Stop, preheat and choke output capability
  • Configurable spare digital input
  • Survives cranking voltage dropouts
  • Compact dimensions, flush-mounted

 27,000.00  31,000.00

Buy all Datakom products like generator controllers, energy meters,  panel meters,  synchronization controllers, auto mains failures (AMF), auto transfer switches (ATS), generator battery chargers, online in Pakistan. You can buy DKG325, Genset control and ATS Panel online or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore who is the authorized distributor of Datakom in Pakistan. All original Datakom products are available at very reasonable and best prices in Pakistan.

Functionalities

  • Automatic mains monitoring
  • Automatic Mains Monitoring
  • Automatic load transfer
  • Automatic starting and stopping
  • Automatic stopping in a fault condition
  • Test mode available
  • Emergency backup mode
  • Internal current transformers
  • Detailed load measurements and protections
  • Internal battery charging rectifier
  •  40 Amp rated Fuel and Crank outputs
  •  Front panel adjustable parameters
  • Stop, preheat and choke output capability
  • Configurable spare digital input
  •  Survives cranking voltage dropouts
  •  Compact dimensions, flush-mounted

Description

DKG-325 is a ready-to-use control and transfer panel for gasoline and diesel gensets rated up to 15kVA. It supports both 1 and 3 phase gensets. The unit incorporates all necessary components for battery charging, genset control and load transfer between mains and genset. Gensets may be  automatized using the DKG-325, without the need for any additional equipment. Thanks to the unit, automatization of small gensets have become easy and cost-effective. In AUTO position, the unit monitors 3 phases of the mains, runs, and stops the genset automatically and performs load transfer.  Then the engine is running, it monitors internal protections and alarm inputs. The unit features 2 contactors, a battery charging rectifier and the automatic control circuitry in one enclosure. It is the equivalent of a complete genset control panel. Internal contactors are rated for 40Amp switching and are capable of carrying 25Amp continuously. Fuel and crank outputs are provided through 40Amp rated relays and do not require additional relays. The internal battery charging rectifier is rated 1Amp @12V-DC. The internal rectifier is sufficient for the float charging of the engine start battery.
The unit features 3 internal current transformers. It measures currents and power from both genset and mains. Timers, threshold levels, input and output configurations are digitally programmable. Programs are modified through front panel pushbuttons and do not require an additional unit.

Click Here To Download DKG325 User Manual 

 

Technical Specifications

DC Supply Range: 9.0 – 16.0 V-DC.
DC supply current:
250 mA-DC typical @12V-DC
500 mA-DC max. @12V-DC
Alternator Voltage: 0-250 V-AC (Phase-Neutral)
Alternator Frequency: 0-100 Hz.
Mains Voltage: 0-250 V-AC (Phase-Neutral)
Mains Frequency: 0-100 Hz.
Load Current: 3x25A / 230V-AC continuous
Cranking Dropouts: survives 0V for 100ms.
Fuel and Crank Relay Outputs: 40 A / 12V-DC
Auxiliary Output: 10A / 12 V-DC
Charge Excitation: min 2 W.
Battery Charge Current: min 1A / 13.7V-DC (195-250V-AC)
Operating temp.: -40°C (-40°F) to 70°C (158°F).
Storage temp.: -55°C (-67°F) to 80°C (176°F).
Maximum humidity: 95% non-condensing.
Dimensions: 200x 148 x 72 mm (GxYxD)
Panel Cutout: 176 x 121mm minimum.
Weight: 700 g (approx..)
Enclosure: Flame retardant, high temp ABS/PC (UL94-V0)
IP Protection: IP54 (front).
EU Directives
-2006/95/EC (low voltage)
-2004/108/EC (electromagnetic compatibility)
Reference standards for EU Conformity:
-EN 61010 (safety)
-EN 61326 (EMC)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DKG325 Genset Control & ATS Panel”

There are no reviews yet.

× How can I help you?