-20%

AVR EVR106 Voltage Regulator for Genset

China

Key Features

  • EVR106  Automatic Voltage Regulator  Exact Generic Replacement
  • INPUT: Voltage: 180-300V ac, Frequency: 50-60 Hz nominal, Phase: 1
  • OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 5 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
  • Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
  • Unit power dissipation: 10 watts maximum  Build up voltage4 Volts @ AVR terminals

 28,000.00  35,000.00

Compare

AVR EVR106 Voltage Regulator for Genset

Buy all generator AVRs in Pakistan. You can buy AVR EVR106 Voltage Regulator for Genset online anywhere from Pakistan or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore who are the main distributor of Generator AVRs. All original AVRs or Genset controller are available at very reasonable and best prices in Pakistan.

Product Description

EVR106 (AVR) is a generator automatic voltage regulator based on half-wave phase-controlled rectifier excitation principle. The device that stabilizes the output voltage of the alternator by adjusting the excitation current of the generator. Used as auxiliary windings, phase power supply as the excitation power generator. With high stability, fast response, easy installation and maintenance features.

1, S1, S2 for the current compensation input, and the machine, the access ratio is In / 5A, the capacity of 5VA adjustable current transformer (CT) output.
2, A1, A2 for the analog voltage regulator input, can be connected to an external  5Vdc adjustable voltage source.
3, if the need for remote voltage adjustment, can be in VR1, VR2 can be connected between a 10 ~ 100K / 1 ~ 2W potentiometer, otherwise, must be shorted!

*Adjustable soft start circuitry is included to provide a smooth controlled build up of generator output voltage.

Sensing Input Voltage 180~250Vac
Frequency 50-60 Hz nominal
Power Input Voltage 180~300 Vac
Current 5A
Frequency 50/60 HZ
Output Voltage Max 180V dc
Current Continuous5 A,
Intermittent 6A for 10 secs
Resistance 10 K-100K
Regulation +/- 0.5% RMS with 4% engine governing
Thermal Drift 0.02% per Deg. C change in AVR ambient
Soft Staret Ramp Time 0.4 – 4 seconds
Typical system response AVR response 20ms
Filed current to 90% 80 ms
Machine Volts to 97% 300ms
External voltage adjustment +/-10% with 5k ohm 1 watt trimmer
Under frequency protection Set point 95% Hz
Slope 100%-300% down to 30 Hz
Max. Dwell 20% volts/S recovery
Unit power dissipation 18 watts maximum
Analogue Input Maximum input +/- 5 Vdc
Sensitivity 1v for 5% Generator Volts (adjustable)
Input resistance 1k ohm
Quadrature Droop Input 10 ohms burden
Max. sensitivity: 0.22 A for 5% droop 0PF
Max. input: 0.33A
Environmental Vibration 20-100 Hz,50mm/se
100Hz  2kHz, 3.3g
Operating temperature -40 to +70 Deg. C
Relative Humidity 0-70 Deg.
C
95%
Storage temperature -55 to +80 Deg. C
brands

China

color

Black

Sensing Input Voltage 180~250Vac
Frequency 50-60 Hz nominal
Power Input Voltage 180~300 Vac
Current 5A
Frequency 50/60 HZ
Output Voltage Max 180V dc
Current Continuous5 A,
Intermittent 6A for 10 secs

Resistance

10 K-100K
Regulation +/- 0.5% RMS with 4% engine governing
Thermal Drift 0.02% per Deg. C change in AVR ambient
Soft Staret Ramp Time 0.4 – 4 seconds
Typical system response AVR response 20ms
Filed current to 90% 80 ms
Machine Volts to 97% 300ms
External voltage adjustment +/-10% with 5k ohm 1 watt trimmer
Under frequency protection Set point 95% Hz
Slope 100%-300% down to 30 Hz
Max. Dwell 20% volts/S recovery
Unit power dissipation 18 watts maximum
Analogue Input Maximum input +/- 5 Vdc
Sensitivity 1v for 5% Generator Volts (adjustable)
Input resistance 1k ohm
Quadrature Droop Input 10 ohms burden
Max. sensitivity: 0.22 A for 5% droop 0PF
Max. input: 0.33A
Environmental Vibration 20-100 Hz,50mm/se
100Hz  2kHz, 3.3g
Operating temperature -40 to +70 Deg. C
Relative Humidity 0-70 Deg.
C
95%
Storage temperature -55 to +80 Deg. C
× How may I help you?