-7%
,

DSE6020-MKII Auto Mains Failure Unit


Key Features

  • Large back-lit icon display
  • Heated display option available
  • Fully configurable via the fascia or PC using USB comm.
  • Efficient power save mode
  • 3 phase generator sensing
  • 3 phase mains (utility) sensing
    Generator/load power monitoring (kW, kV A, kV Ar, pf)
  • Accumulated power monitoring (kW h, kVA h, kVAr h)
  • Generator overload protection (kW)
  • Generator/load current monitoring and protection
  • Breaker control via fascia buttons
  • Fuel and start outputs, configurable when using CAN
  • 4 configurable DC outputs
  • 4 configurable analog/digital inputs
  • 6 configurable digital inputs
  • Support for 0-10 V & 4-20 mA oil pressure sensors
  • Configurable staged loading outputs
  • CAN, MPU, and alternator speed sensing in one variant
  • 3 engine maintenance alarms
  • Engine speed protection
  • Engine hours counter
  • Engine pre-heat
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel pump control
  • Real-time clock
  • Battery voltage monitoring
  • Start on low battery voltage
  • Configurable remote start input
  • 1 alternative configuration
  • Comprehensive warning, electrical trip or shutdown protection upon a fault condition
  • LCD and LED alarm indication
  • Configurable event log (50)
  • Click Here To Download DSE6020 User Manual
  • Click Here To Download DSE6020 Data Sheet

 42,000.00  45,000.00

Compare

Buy all Deep Sea (DSE) products like generator controllers, energy meters, panel meters, synchronization controllers, auto mains failures (AMF), auto transfer switches (ATS), generator battery chargers, etc. in Pakistan. You can buy DSE6020-MKII Autom Mains Failure Controller online anywhere from Pakistan or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore who are the distributors of Deep Sea (DSE) in Pakistan. All original Deep Sea products are available at very reasonable and best prices in Pakistan.

Key Features

  • Large back-lit icon display
  • Heated display option available
  • Fully configurable via the fascia or PC using USB comm.
  • Efficient power save mode
  • 3 phase generator sensing
  • 3 phase mains (utility) sensing
  • Generator/load power monitoring (kW, kV A, kV Ar, pf)
  • Accumulated power monitoring (kW h, kVA h, kVAr h)
  • Generator overload protection (kW)
  • Generator/load current monitoring and protection
  • Breaker control via fascia buttons
  • Fuel and start outputs, configurable when using CAN
  • 4 configurable DC outputs
  • 4 configurable analog/digital inputs
  • 6 configurable digital inputs
  • Support for 0-10 V & 4-20 mA oil pressure sensors
  • Configurable staged loading outputs
  • CAN, MPU, and alternator speed sensing in one variant
  • 3 engine maintenance alarms
  • Engine speed protection
  • Engine hours counter
  • Engine pre-heat
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel pump control
  • Real-time clock
  • Battery voltage monitoring
  • Start on low battery voltage
  • Configurable remote start input
  • 1 alternative configuration
  • Comprehensive warning, electrical trip or shutdown protection upon a fault condition
  • LCD and LED alarm indication
  • Configurable event log (50)

Description

The DSE6010 MKII Auto Start Control Module and the DSE6020 MKII Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications.
Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules give comprehensive engine and alternator protection. This is indicated on a large back-lit LCD icon display via an array of warning, electrical trip and shutdown alarms.
Electronic J1939 (CAN) and nonelectronic MPU and alternator sensing engine support for diesel, gas and petrol engines all in one variant. With a number of flexible inputs, outputs and protections, the modules can be easily adapted to suit a wide range of applications.
Through USB Communication both modules can be configured using the DSE Configuration Suite PC Software or through the module’s front panel editor.

Click Here To Download DSE6020 User Manual

Click Here To Download DSE6020 Data Sheet

color

Black

Technical Specifications

DC SUPPLY CONTINUOUS VOLTAGE RATING: 8 V to 35 V Continuous
CRANKING DROPOUTS: Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT: 100 mA at 12 V, 105 mA at 24 V
MAXIMUM STANDBY CURRENT: 60 mA at 12 V, 55 mA at 24 V
MAXIMUM SLEEP CURRENT: 40 mA at 12 V, 35 mA at 24 V
GENERATOR & MAINS (UTILITY) VOLTAGE RANGE: 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE: 3.5 Hz to 75 Hz
INPUTS DIGITAL INPUTS A to F: Negative switching
ANALOGUE INPUTS A to C Configurable as: Negative switching digital input: 0 ? to 480 ?
ANALOGUE INPUT D Configurable as: Negative switching digital input: 0 V to 10 V 4 mA to 20 mA 0 ? to 480 ?
OUTPUTS: OUTPUT A (FUEL): 10 A short term, 5 A continuous, at supply voltage
OUTPUT B (START): 10 A short term, 5 A continuous, at supply voltage AUXILIARY OUTPUTS C, D, E & F 2 A DC at supply voltage

DIMENSIONS OVERALL: 216 mm x 158 mm x 43 mm 8.5?? x 6.2? x 1.5?
PANEL CUT-OUT: 184 mm x 137 mm 7.2?? x 5.3?
MAXIMUM PANEL THICKNESS: 8 mm 0.3?
STORAGE TEMPERATURE RANGE: -40?C to +85?C -40 ?F to +185 ?F
OPERATING TEMPERATURE RANGE: -30?C to +70?C -22 ?F to +158 ?F
HEATED DISPLAY VARIANT: -40 ?C to +70 ?C -40 ?F to +158 ?F

You may also like…

× How may I help you?